Name: F436 Square Beveled Structural Hardened Washer Medium Carbon Steel Hot Dip Galvanized
Brand: Ningbo YokeLink Machinery Co., Limited
Price: 0.50 USD
Availability: InStock

Inicio Productos Accesorios para el transporte de mercancías

F436 Square Beveled Structural Hardened Washer Medium Carbon Steel Hot Dip Galvanized

Datos del producto:

Lugar de origen:	Porcelana
Nombre de la marca:	YOKELINK

Pago y Envío Términos:

Cantidad de orden mínima:	10000 piezas
Precio:	USD0.5~USD0.95
Detalles de empaquetado:	Cartón y plataforma
Tiempo de entrega:	30-45 días
Condiciones de pago:	T/T
Capacidad de la fuente:	50.000 PC por mes

Contactar ahora

Descripción detallada del producto

Material:	Acero inoxidable, acero, hierro de cualquier grado	Refinamiento:	Liso/galvanizado en caliente
Tamaño:	1/2",3/4",1/2",5/8",1-1/4",7/8"

ASTM F436 Hardened Beveled Washer

Yokelink is a Manufacturer of Beveled Washers, comes in square and circular shapes, in nominal sizes 1/2 through 1 1/2 in., with a beveled 1 to 6 ratio surface for
use with American standard beams and channels. Bevel Washers are designed for leveling and shimming purpose and are commonly used when bolting through the flanges of L-beams. These washers are angled spacing components that are used to correct the uneven or imperfect surfaces. Our Range of Beveled Washers are made from medium carbon steel and then hardened as per ASTM specifications. Usually, Beveled Washers are intended to recompense for lack of parallelism in structural applications involving american standards.

Unlike flat washers which are used for parallel mating surfaces, beveled washers are used for non-parallel surfaces. A beveled washer is a special type of washer that has a sloped side and a flat side. The sloped side can accommodate for different installation angles and allows the two non-parallel faces to be mated and aligned with a stable and tight fit. There are different types of beveled washers that come in both various shapes and sizes and with different surface finishes that can affect the strength of a joint. Therefore, it’s important to pick the right type of beveled washer for your project to ensure a strong, resilient joint.

Beveled washers can come in a variety of materials – from metals to rubbers and thermoplastics. For structural and load-bearing applications, beveled washers are commonly made from metals. Oftentimes, these metal beveled washers will also be surface treated so they can be used outdoors and have a high degree of environmental resistance. Some common metals and coatings used for beveled washers are listed below:

Plain iron
Hot-dipped galvanized steel
304 stainless steel
316 stainless steel
Plain cast-iron washers are highly

Specification:

Contacto

Ningbo YokeLink Machinery Co., Limited

Persona de Contacto: Mr. Tony

Teléfono: 86-574-86882908

Otros productos

Hex Washer Head Concrete Screw Hi-Lo Thread Screws Ruspert Tapcon Screw

Material:: Acero al carbono, Acero inoxidable
Terminado:: Zinc, revestimiento RUSPERT AZUL, Dacromet con muesca
Hilo: Cuerdas de hilo de alta y baja
Cabeza:: Cabeza de lavadora hex, cabeza plana

Se aplican los siguientes requisitos:3, DIN 915 Acero Aleado Conjunto de pernos con punta de perro, parche Nylok

Material: Acero aleado, acero inoxidable, latón, aluminio
Finalizar: Revestimiento de zinc, negro, parche de nylok
Especificación: DIN913, DIN914, DIN915, DIN916 ASME B18.3

ASME B18.3, DIN 914 Brass Socket Set screws with Cone Point, Nylok patch

Material: Acero aleado, acero inoxidable, latón, aluminio
Finalizar: Revestimiento de zinc, negro, parche de nylok
Especificación: DIN913, DIN914, DIN915, DIN916 ASME B18.3

Se aplican los siguientes requisitos:3, DIN 913 Conjunto de tornillos de enchufe de acero inoxidable con punto plano, parche Nylok

Material: Acero aleado, acero inoxidable, latón, aluminio
Finalizar: Revestimiento de zinc, negro, parche de nylok
Especificación: DIN913, DIN914, DIN915, DIN916 ASME B18.3

Anclaje de techo de acero zincado para hormigón pernos de acero carbono Anclajes de seguridad para clavos

Material: Acero carbono
Finalizar: Zinc amarillo o zinc transparente
Tamaño: M6, M8
Longitud: 40m m, 50m m, 60m m

Stainless Steel undersized square stock DIN6885 Zinc Plating ANSI/ASME B18.25.2M

Material: acero al carbono o acero inoxidable
Finalizar: Revestimiento con zinc, plano
Especificación: DIN6885ISO3912ASME

ISO3912 DIN6885 Machine Rounded Key Stock Stainless Steel / Carbon Steel

Material: acero al carbono o acero inoxidable
Finalizar: Revestimiento con zinc, plano
Especificación: DIN6885ISO3912ASME